The prototype implements safety measures that allow it to be used by previously instructed personnel without comprehensive electrical knowledge or experience. Moreover, the prototype has proven itself outside the research institution that developed it, e.g. in the facilities of a project partner.
PLexc² is two stage microwave plasma source. The first stage is passive self-igniting under atmospheric pressure conditions in the working gas air. It is powered with 1.3 kW microwave power and delivers charge carriers to the second stage powered with 3.0 kW. Additional gas injection between the stages increases the total flow to 60 to 80 slm.
The wINPlasLab is used to treat a liquid in a beaker with transient spark discharges. During the treatment, the beaker is placed underneath the electrodes, and by adjusting the liquid level in the beaker, the distance between the electrodes and the water surface can be set. An integrated magnetic stirrer provides permanent mixing of the sample substance, and the utilization of leakage transformers for the high-voltage supply provides an inductive current limitation. The system is intended for the treatment of various liquids with different conductivities.
The Ion Wind DBD uses a flat plasma electrode to create a surface dielectric barrier discharge (DBD) in the room air flowing over it. An additional “extraction” electrode is arranged in parallel to form a rectangular ventilation duct. The extraction electrode is charged, so that an additional unipolar electric field through the ventilation duct is created. This drags the ions of one polarity (either positive or negative) generated by the surface DBD in the direction of the extraction electrode.
The HelixJet is a capacitively coupled radio-frequency (RF) plasma source operating at atmospheric pressure. The RF power is applied to two double helix electrodes. The electrodes are placed outside a quartz tube fed by the working gas. The HelixJet has unique features highly relevant for practical applications. The innovative double helix electrode design enables extremely stable and homogeneous plasma conditions at low gas flow rates. This plays a crucial role for the quality and reproducibility of several applications, e.g.